Venture Trucks Size Chart: The Ultimate Guide to Choosing the Perfect Fit

Delve into the Venture Trucks size chart, a comprehensive guide that empowers you to select the ideal trucks for your skateboarding adventures. Whether you’re a seasoned pro or just starting out, this chart will provide you with the knowledge to make an informed decision that enhances your riding experience.

Venture Trucks has established a reputation for producing high-quality trucks that cater to various skateboarding styles. Understanding the intricacies of their size chart is crucial to unlocking the full potential of your skateboard.

Venture Trucks Size Chart Overview

The Venture Trucks size chart is a guide that helps skaters choose the right size trucks for their skateboards. It is important to use the size chart to ensure that the trucks are the correct width for the deck and that they provide the desired level of stability and maneuverability.

The size chart takes into account several factors, including the width of the deck, the wheelbase, and the skater’s weight. By using the size chart, skaters can be sure that they are choosing the right size trucks for their needs.

Factors Affecting Truck Size Selection, Venture trucks size chart

There are several factors that can affect the size of trucks that a skater should choose. These factors include:

  • Deck width:The width of the deck is the most important factor to consider when choosing the size of trucks. The trucks should be wide enough to fit the deck, but not so wide that they overhang the edges.
  • Wheelbase:The wheelbase is the distance between the front and rear axles of the trucks. A longer wheelbase provides more stability, while a shorter wheelbase provides more maneuverability.
  • Skater’s weight:The weight of the skater can also affect the size of trucks that they should choose. Heavier skaters may need to use larger trucks to provide more support.

Truck Sizing Parameters

Selecting the right truck size is crucial for optimal skateboard performance. Several key parameters determine truck size, and accurately measuring these parameters is essential for a proper fit.

Truck Width

Truck width refers to the distance between the inside edges of the hanger’s axles. It should match the width of your skateboard deck for stability and responsiveness. To measure truck width, use a ruler or measuring tape to measure the distance between the center of the two axle holes on the hanger.

Venture trucks are available in a variety of sizes, so it’s important to consult a size chart before making a purchase. If you’re looking for a seating chart for the Iowa Speedway, you can find one here: iowa speedway seating chart . Once you have the correct size, you can enjoy the smooth ride and durability that Venture trucks offer.

Axle Length

Axle length determines the width of your skateboard’s stance. It is measured from the outside edge of one wheel bearing to the outside edge of the other wheel bearing on the same axle. A wider axle length provides more stability, while a narrower axle length offers increased maneuverability.

To measure axle length, use a ruler or measuring tape to measure the distance between the outside edges of the two wheel bearings.

Hanger Angle

Hanger angle refers to the angle at which the hanger is positioned relative to the baseplate. It affects the skateboard’s turning radius and stability. A steeper hanger angle (e.g., 53°) provides quicker turns, while a shallower hanger angle (e.g., 48°) offers more stability.

If you’re looking for the perfect size Venture trucks for your skateboard, be sure to check out our handy size chart. We’ve got all the info you need to find the right fit for your deck. And while you’re at it, why not take a peek at our kings theater brooklyn seating chart ? It’s the perfect way to plan your next night out at the theater.

After all, who doesn’t love a good show? Back to the venture trucks size chart – remember, the right size trucks will make all the difference in your skating experience.

To measure hanger angle, use a protractor to measure the angle between the baseplate and the hanger.

Truck Size Chart
Truck WidthAxle LengthHanger Angle

3. Axle Width and Wheelbase

Axle width and wheelbase are two critical factors that affect the stability, maneuverability, and overall feel of a skateboard. Understanding the relationship between these two parameters is crucial for choosing the right setup for your riding style.

Axle Width

Axle width refers to the distance between the two axles on the skateboard. A wider axle provides more stability and is generally preferred for larger riders or those who want a more stable ride. Conversely, a narrower axle is more maneuverable and is better suited for smaller riders or those who prefer a more agile ride.


Wheelbase refers to the distance between the front and rear axles. A longer wheelbase provides more stability and a smoother ride, while a shorter wheelbase is more maneuverable and responsive. Choosing the right wheelbase depends on your riding style and the type of skateboarding you do.

Recommended Axle Widths and Wheelbases for Different Riding Styles

Here are some general guidelines for choosing the appropriate axle width and wheelbase for different riding styles:

  • Street skating:Narrower axle width (7.5″ – 8.0″) and shorter wheelbase (14″ – 14.5″) for increased maneuverability and responsiveness.
  • Vert skating:Wider axle width (8.0″ – 8.5″) and longer wheelbase (14.5″ – 15.0″) for increased stability and control in the air.
  • Transition skating:Medium axle width (8.0″ – 8.25″) and wheelbase (14.0″ – 14.5″) for a balance of stability and maneuverability.
  • Cruising:Wider axle width (8.25″ – 8.5″) and longer wheelbase (15.0″ – 15.5″) for a more stable and comfortable ride.

4. Height and Ground Clearance

Venture Trucks Size Chart: The Ultimate Guide to Choosing the Perfect Fit

Truck height and ground clearance are crucial for customizing your ride and ensuring optimal performance. These factors impact your board’s stability, maneuverability, and overall feel. Adjusting the height allows you to adapt to different riding conditions and board sizes.

Ground clearance is the vertical distance between the bottom of your board and the ground. Higher trucks provide more ground clearance, while lower trucks have less. The right ground clearance helps prevent wheel bite, where the wheels rub against the deck during turns, potentially causing instability or even a fall.

Choosing the Right Truck Height

The ideal truck height depends on your riding style, board size, and terrain. For example, higher trucks with more ground clearance are suitable for rougher terrain or street skating, as they provide better obstacle clearance and reduce the risk of wheel bite.

Conversely, lower trucks offer greater stability and control for technical tricks or park skating, where quick and precise maneuvers are crucial.

As a general guideline, larger boards typically require higher trucks to maintain proper ground clearance. Conversely, smaller boards can get away with lower trucks without compromising stability.

5. Turning Radius and Responsiveness

Truck size plays a crucial role in determining the turning radius and responsiveness of your skateboard. Wider trucks provide a wider turning radius, making them more stable at high speeds and on rough terrain. However, they can be less maneuverable in tight spaces and at low speeds.

Conversely, narrower trucks offer a tighter turning radius, allowing for more agile maneuvers and quick turns.

Finding the Balance

The key is to find a balance between stability and maneuverability that suits your riding style and preferences. For cruising, downhill riding, and riding on rough surfaces, wider trucks with a larger turning radius are recommended for increased stability. For street skating, park skating, and tricks that require quick turns, narrower trucks with a tighter turning radius are more suitable.

6. Compatibility and Installation


Venture Trucks are compatible with most standard skateboard decks, ranging from 7.5″ to 8.5″ in width. The truck’s axle width should match the width of the deck to ensure stability and proper turning.

Installing Venture Trucks is relatively straightforward. Begin by placing the trucks on the deck, aligning the mounting holes. Use the provided hardware to secure the trucks to the deck, ensuring the bolts are tightened firmly.

Tightening the Kingpin

The kingpin is a crucial component that holds the truck together. It is essential to tighten the kingpin adequately, but avoid overtightening, as this can restrict the truck’s turning ability.

Use a 9/16″ wrench or socket to tighten the kingpin nut. Aim for a snug fit that allows the truck to turn smoothly without excessive play.

7. Customization and Accessories

Venture Trucks offer a wide range of customization options to suit different riding styles and preferences. With different bushings and pivot cups, you can fine-tune the performance of your trucks to match your riding style.

Choosing the right bushings and pivot cups is essential for optimizing the performance of your trucks. Bushings are small, cylindrical pieces of rubber that fit between the hanger and baseplate of the truck. They play a crucial role in determining the responsiveness and stability of the truck.

Pivot cups, on the other hand, are small, conical pieces of plastic or metal that fit into the baseplate of the truck. They affect the steering radius and stability of the truck.


Bushings come in different shapes and hardness levels. Harder bushings provide more stability and less responsiveness, while softer bushings provide more responsiveness and less stability. The shape of the bushing also affects its performance. Cone bushings, for example, provide a more progressive feel than barrel bushings.

Pivot Cups

Pivot cups come in different shapes and sizes. Taller pivot cups provide a higher steering radius, while shorter pivot cups provide a lower steering radius. The material of the pivot cup also affects its performance. Metal pivot cups, for example, are more durable than plastic pivot cups.

Popular Customization Options

Some popular customization options for Venture Trucks include:

  • Softer bushingsfor a more responsive and less stable ride
  • Harder bushingsfor a more stable and less responsive ride
  • Taller pivot cupsfor a higher steering radius
  • Shorter pivot cupsfor a lower steering radius
  • Metal pivot cupsfor increased durability

8. Maintenance and Troubleshooting: Venture Trucks Size Chart

Venture trucks size chart

Regular maintenance of your Venture Trucks is essential for ensuring their optimal performance and longevity. Proper cleaning, lubrication, and timely identification of issues can prevent costly repairs and extend the life of your trucks.

Cleaning and Lubrication

  • Clean your trucks regularly to remove dirt, grime, and debris that can accumulate over time. Use a mild soap solution and a soft brush to gently scrub the trucks.
  • Lubricate the moving parts of your trucks, such as the kingpins, pivot cups, and bushings, with a high-quality skateboard lubricant. This will reduce friction and wear, ensuring smooth and responsive performance.

Common Troubleshooting Issues

  • Loose trucks:If your trucks feel loose or wobbly, tighten the kingpin nuts using a skate tool. Overtightening can damage the threads, so apply moderate pressure.
  • Squeaky trucks:Squeaking sounds from your trucks usually indicate a lack of lubrication. Apply lubricant to the kingpins, pivot cups, and bushings to eliminate the noise.
  • Uneven wear on wheels:If you notice uneven wear on your wheels, it could be due to misaligned trucks. Loosen the axle nuts, adjust the trucks to align properly, and retighten the nuts.